iON Base

Available for order
  • GPS/GLONASS user terminal
  • Flash: 2.5 million records
  • Built-in battery
  • Connectors/interfaces:
    4xIN/2xOUT/ 2xSIM
  • Description
  • Specifications
  • Documentation

    The iON Base Navigation Terminal is an advanced onboard equipment designed for installation on any vehicle. The device primary function is collecting data on position, direction, speed ,operating conditions of a target object, and reading data from the connected sensors.

The terminal receives data on its positioning, current time, speed and driving direction from the GPS and GLONASS satellites.If no access to the satellites provided (underground parking, reinforced concrete floors and walls, topographic features, etc.), the object is positioned via the nearest GSM stations.Current position, indications of connected devices and onboard data is transmitted to the server over the GSM network.The web application allows the user to track the vehicle position and operating conditions via a PC, laptop, mobile phone or tablet computer from anywhere in the world.

    The terminal holds all the features required for a variety of tasks. iON Base supports most of the interfaces.The driver identification system and thermosensors can be connected using 1-Wire, RS-485 interface allows connecting various sensors, indicators and additional equipment, CAN (J1939/FMS) interface provides direct data reading from the onboard computer (fuel consumption, tank fuel level, load on axle, motormeter, engine RPM, engine load, etc.) 

    If no connection with the server is established, all data is recorded into the integrated memory of 128 MB capacity, which is sufficient for storing of 2.5 million records! In case of a vehicle position out of the cellular network coverage, SIM cards zero balance or operation failures of collection servers, all the data received by the terminal is maintained.The data can be transmitted to the server when connection is restored, when connecting the device to a PC or via USB flash drive.USB data uploading is protected by the integrated key system.The iON Base terminal features an exclusive mechanism of data transmission to the server using two self-sufficient packets. 

    The device complies with the requirements of high reliability and fault tolerance. Dual SIM card support provides smooth operation and traffic economy in a roaming area. All the connectors, including both SIM cards are hidden by the case equipped with two tamper sensors. In case of tampering with the device operation, the signal to the dispatcher station is sent. Besides, there is an option of firmware remote updating. All the iRZ equipment has an open standard protocol and can be integrated into different tracking systems.

iON Base Key Features:
  • Real-time positioning of a target object, its speed and moving direction
  • Data collection from various connected sensors
  • Data transmission to the server (on request or schedule)
  • Program notification of an operator on "alarm events" (power cut-off, internal antennas failure, case tampering, speeding, fuel draining, etc.), notification via SMS and email
  • Data storage in nonvolatile memory
  • Driver behavior analysis
iON Base Key Features:
  • the capacity of the internal nonvolatile memory of 12 MB allows storing up to 2.5 million records;
  • exclusive mechanism of data transmission to the server;
  • driver behavior analysis (built-in accelerometer);
  • power-saving modes;
  • ample opportunities for connection of additional equipment;
  • support for remote updating of terminal firmware;
  • integrated protection against the terminal tempering (antenna connectors, cables, SIM card slots are protected by the cover with mechanical and electronic seal);
  • support for data uploading from the "black box" to the USB flash drive (built-in key security system is enabled);
  • AES encryption use for data transmission to the server and uploading to the USB flash drive;
  • smooth operation even in harsh environments;
  • protection against voltage swings (up to 90V);
  • built-in LiPol battery of 1250 mA/h;
  • dual SIM card support;
  • SIM chip support **;
  • voice interface.
Technical Specifications*:
  • GPS/GLONASS navigation receiver
  • operating frequency range: GSM/GPRS 900/1800 MHz; (850/900/1800/1900 MHz)**; 3G (2100 MHz)**
  • antennas:
    • external GPS/GLONASS antenna
    • external GPS antenna
  • flash-memory: 128 MB (2,5 million of records)
  • SIM cards:
    • dual SIM card support
    • SIM chip support **
  • built-in accelerometer: three-axis
  • additional features:
    • firmware remote update, WEB
    • connectors cover with the tamper sensor
Electrical Specifications:
  • power voltage 9 to 30V
  • maximum voltage rating in a long-term mode: 50 V
  • current consumption in various modes (at 24V power voltage), max:
    • 75 mA (operating mode, the battery is charged)
    • 210 mA (operating mode, the battery is discharged)
    • 3.4 mA (6.1 mA at 12V) (sleep mode)
  • built-in battery: Li-Pol
Physical Specifications:
  • dimensions: 109 х 109 х 21 mm
  • weight, max: 210 g
  • gross weight, max: 560 g
  • Ingress Protection: IP54
  • operating temperature: -40ºС to +60ºС
Connectors and Interfaces:
  • connectors:
    • main Microfit 14 interface connector
    • additional Microfit 8 interface connector
    • SMA connector for GSM antenna
    • SMA connector for GPS/GLONASS antenna
    • SIM card holder 1**
    • SIM card holder 2
    • Mini USB connector
  • main interfaces:
    • 4 multipurpose inputs ***
    • 2 multipurpose outputs ***
    • one RS-485 bus
    • CAN-bus (J1939 / FMS)
    • one 1-Wire bus
    • RS-232 bus**
    • voice communication
    • USB

* technical specifications are subject to change by the manufacturer without prior notice
** optional
*** total number of inputs/outputs amounts to 4